空调故障常规检修方法
Routine maintenance method of air conditioning fault
(1) 、插上电源插头,室内机电源指示灯亮,如无电源指示,说明您家的电源有故障或指示等损坏。
(1) Plug in the power plug and the power indicator of the indoor unit is
on. If there is no power indicator, it indicates that the power supply
of your home is faulty or damaged.
(2) 、有电源指示,用遥控器按操作键,信号发射不出去。首先,检查遥控器内的电池是否有电,然后检查电池的正负极片触点有无氧化腐蚀,
型槽模具 井盖钢模具 保定雅思 一次性止血带 保定养老院 保定水处理设备 一次性止血带 若上述正常,检查遥控器内部电路板是否损坏,可将遥控器*近一台调幅收音机,按遥控器键进行干扰试验,听收音机是否发出有“嘟嘟”声,有声说明遥控器无故障。
(2) If there is a power indication, press the operation key with the
remote control, and the signal cannot be transmitted. First, check
whether the battery in the remote control is charged, and then check
whether the positive and negative contacts of the battery are oxidized
and corroded. If the above is normal, check whether the internal circuit
board of the remote control is damaged. Close the remote control to an
AM radio, press the remote control key for interference test, and listen
to whether the radio emits a "beep", which indicates that the remote
control is not fault