空调使用中的六个实用常识
Six Practical Common Senses in the Use of Air Conditioning
一、注意线路安全:应具备适合的用电容量和可靠的专线连接,并具可靠的接地线。
First, pay attention to the safety of the line: it should be equipped
with suitable power consumption capacity, reliable dedicated line
connection and reliable grounding line.
二、注意细心调节室温: 制冷时室温定高1℃、制热时室温定低2℃、均可节省 10% 以上,而人体几乎觉察不到温度的差别。
2. Attention should be paid to carefully adjusting the room temperature:
when refrigerating, the room temperature should be set at a high
temperature, while when heating, the room temperature should be set at a
low temperature, which can save more than 10%, while the human body can
hardly detect the difference in temperature.
三、定期清扫滤清器:灰尘会堵塞滤清器网眼,降低冷暖气效果,应半月左右清扫一次。 尽量少开门窗、使用厚质、透光少的窗帘可以减少房内外热量交换,利于省电。
3. Clean the filter regularly: Dust will clog the mesh of the filter and
reduce the effect of cooling and heating. Clean the filter once every
half month or so. Minimizing the opening of doors and windows, using
thick curtains with less light transmission can reduce the heat exchange
inside and outside the room, which is conducive to saving electricity.
四、勿挡住室外机的出风口:否则也会降低冷暖气效果,浪费电力。
Fourth, do not block the outlet of outdoor machine: otherwise, it will
reduce the heating and cooling effect and waste electricity.
五、选择适宜出风角度:冷气
阳雕刻 手套生产设备 果树反光膜 北京纯水设备 保定网站制作 排水槽模具比空气重,易下沉,暖气流则相反。所以制冷时出风口向上,制热时则向下,调温效率大大提高。
Fifth, choose the appropriate outlet angle: the cold air is heavier than
the air, easy to sink, but the warm air is the opposite. Therefore,
when refrigerating, the outlet is upward, while when heating, it is
downward, which greatly improves the efficiency of temperature
regulation.
六、控制好开机和使用中的状态设定:开机时,设置高冷 / 高热,以最快达到控制目的;当温度适宜时,改中、低风,减少能耗,降低噪音。
6. Control the state settings of startup and operation: when startup,
set high-cold/high-heat to achieve the control purpose as soon as
possible; when the temperature is appropriate, change to medium and low
wind to reduce energy consumption and noise